Feature Removal; Safety Screen Removal - Faber Matrix FMG3326F Instruction Manual

Feature Removal

Safety Screen Removal

Follow the instructions below for safety screen removal .
! NOTE: Safety screen may be shipped separately from the appliance
The barrier is designed to reduce the risk of burns from the hot viewing glass and is provided with this appliance .
It must remain installed for the protection of children and other at-risk individuals .
1 . Loosen the coupling nuts from the screen brackets at
the top using a small wrench or socket set .
There are two coupling nuts per bracket . The front
screen has two brackets, and each side screen has
one .
2 . Push the top frame of the screen up until it clears the
bottom of the opening .
3 . Tilt the bottom of the screen out and pull down so the
top frame clears the opening .
To reinstall the safety screen, follow the steps above in
reverse order . Ensure nuts are secured tightly .
65
!
Do NOT operate the fireplace without the safety screen barrier.
WARNING
FaberFires.com