Table of Contents
Advertisement
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Turn off the electrical supply going to the range.
2. Pull the range away from the wall so that you can access the rear panel.
3. Remove the back cover, remove 15 screws from the back cover.
4. Remove vent trim rear cover, rear cover, vent trim and vent cover.
5 Using a Phillips head screwdriver remove the 2 side and 2 top screws of
the cooktop and 4 front and the 2 under screws of the manifold.
6 Remove (11EA) hex-Phillips head screws on the cook top. And lift it.
COMPONENT ACCESS
REMOVING THE COOLING FAN
WARNING
CAUTION
7. You can find cooling fan. Please be assembled with a screws 3(EA) the
cooling fan.
-3-8-
Advertisement
Table of Contents
