Reassembling The Door Glass & Hinge Hanger(For The Lower Door) - LG LUTG4519SN Service Manual

Slide-in gas double range
Hide thumbs Also See for LUTG4519SN:
Table of Contents

Advertisement

REASSEMBLING THE DOOR GLASS & HINGE HANGER(FOR THE LOwER DOOR)
REASSEMBLY METHOD OF INNER DOOR GLASS :
1. See steps 1-2 on page 3-29)
REASSEMBLY NOTE : When you reinstall the Insulation around the oven
door glass, make sure that the insulation is not visible in the glass after the
door is reassembled.
COMPONENT ACCESS
REASSEMBLY METHOD OF HINGE HANGER :
1. Cover the inner assembly into the door frame.
2. Fasten 4 screws in the middle of door frame.
3. Place the door liner assembly on a padded work surface with the hinge
hangers over the edge.
4. Fasten 2 screws in the bottom of door fram
-3-30-
4 screws
4 screws

Advertisement

Table of Contents
loading

Table of Contents