Table of Contents
Advertisement
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Turn off the electrical supply going to the range.
2. Open the oven door.
3. Remove the 4 screws located at the front side of the cooktop.
4. Remove the 6 screws located under the controller.
COMPONENT ACCESS
REMOVING THE CONTROLLER
WARNING
CAUTION
5. To remove the knob, Pull out the knob of range.
6. Pull the controller from the range
You can remove the controller after unplug the 8ea connectors of Main
PCB and Cooktop.
-3-4-
Pull
Advertisement
Table of Contents
