Table of Contents
Advertisement
e) Remove 2 screws to replace the lower latch.
2 Screws
f) Pull out the Lower latch from the bar.
5. To remove the upper door switch:
a) If not already done, Remove the back cover, cooktop plate, manifold
panel and cooling fan(see page 3-2, 3-4, 3-6 and 3-8 for the
procedure).
b) Remove the Side panels.
(see page 3-29 for the procedure).
COMPONENT ACCESS
Unhook
Actuating
Rod
c) Remove the lower door switch from the range.
To do this, squeeze tabs and use a ratchet extension or a small
socket, and tap it out of the hole with a hammer.
d) Disconnect the wires from the terminals.
-3-14-
Door Switch
Wires
Advertisement
Table of Contents
