Removing The Door Latch & Lower Door Switch(For The Lower Oven Only) - LG LUTG4519SN Service Manual

Slide-in gas double range
Hide thumbs Also See for LUTG4519SN:
Table of Contents

Advertisement

REMOVING THE DOOR LATCH & LOWER DOOR SWITCH(For the Lower oven only)
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Use caution when handling sheet metal parts while
servicing the range.
- Some parts may have sharp edges, which could result in injury.
1. Turn off the electrical supply going to the range.
2. Remove the Upper & Lower door. (see page 3-23, 3-24 for the procedure).
3. Remove the back cover, cooktop plate, manifold panel and cooling fan(see
page 3-2, 3-4, 3-6 and 3-8 for the procedure).
4. Remove the Side panels. (see page 3-32 for the procedure).
5. To remove the Lower door latch.
a) Remove 4 screws to detach 2 hinge supporters.
COMPONENT ACCESS
WARNING
CAUTION
2 Screws
a) Remove 2 screws to widen the space between Upper & Lower
cavities.
2 screws
b) Remove 4 screws from upper and lower wool cover back.
d) Tilt Upper cavity cautiously, make sure that the controller does not
fall down to the floor.
-3-13-
4 Screws

Advertisement

Table of Contents
loading

Table of Contents