Table of Contents
Advertisement
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Use caution when handling sheet metal parts while
servicing the range.
- Some parts may have sharp edges, which could result in injury.
1. Turn off the electrical supply and gas supply going to the range.
2. Open the oven door and remove the racks from the oven.
3. To remove an oven temperature sensor :
a) Remove the 1 screw.
b) Disconnect the connector in the back of the oven.(To get the
connector, pull the wire toward the cavity).
c) Remove the oven sensor.
COMPONENT ACCESS
REMOVING THE OVEN TEMPERATURE SENSORS
(FOR BOTH UPPER & LOWER OVEN)
WARNING
CAUTION
-3-22-
1 screw
Advertisement
Table of Contents
