Table of Contents
Advertisement
2. CONVERT BAKE BURNER ORIFICES
OVEN LOWER BURNER (BAKE)
ORIFFICE
(NOZZLE)
②④
③
Rotate the orifice spud
counterclockwise to
remove
1) Remove rear cover.
2) Remove the nozzle holder using 13/32" or 10mm wrench and Phillips
head screwdriver.
3) Remove the orifice spud from nozzle holder using a 13/32" or 10mm
nut driver. Install the LP orifice spud (G) to the nozzle holder. To
prevent leakage. Make sure the orifice spud is securely screwed into
the nozzle holder.
4) Re-install the nozzle holder
OVEN LOWER BURNER (BAKE)
OVEN BOTTOM
BAKE BURNER ASSEMBLY ORIFICE (NOZZLE)
CONVERSION TO LP GAS
①
REAR
COVER
FAN
COVER
NOZZLE HOLDER
Rotate the orifice spud
counterclockwise to remove
FLAME
GUIDE
NOZZLE
HOLDER
1) Remove oven door, oven bottom, frame guide, oven burner
assembly.
2) Remove the orifice spud from nozzle holder using a 13/32" or 10 mm
wrench.
3) Install the LP orifice spud (F) to the nozzle holder. To prevent
leakage, make sure the orifice spud is securely screwed into the
nozzle holder.
3. CONVERT BROIL BURNER ORIFICES
OVEN UPPER BURNER (BROIL)
WIRE COVER
1) Remove oven door and broil burner assembly. Then remove the wire
cover using a Phillips head screwdriver.
2) Release the connector of the igniter.
3) Remove the orifice spud from nozzle holder using a 13/32" or 10mm
wrench.
4) Install the LP orifice spud (F) to the nozzle holder. To prevent
leakage, make sure the orifice spud is securely screwed into the
nozzle holder.
-5-4-
ORIFICE (NOZZLE)
BROIL BURNER
ASSEMBLY
Rotate the orifice spud
counterclockwise to remove
NOZZLE
HOLDER
Advertisement
Table of Contents
