Roland R1000 Series Manual page 50

Mounting
4.3.3.2 Spring loaded sensor bracket SHS42GS with flat suction cup
The spring loaded sensor bracket SHS42GS with flat suction cup is intended for accommodating
the sensors. It is well suitable for use in feeder destacking applications (only vertical motions, no
turning motions). For usage with robotic destackers the sensor bracket SHS42G-FB (with bellow
suction cup) is to be preferred.
Suction cup
Fig. 24: Spring loaded sensor bracket SHS42GS with flat suction cup
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
50
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
Clamping bracket SHK
Spring loaded sensor bracket
Sensor
Rubber nipples
Sensor edge
All dimensions are in mm. The dimensional tolerance is ± 0.4 mm
Manual
"A"
Sensor

approx. 1 0 1
All dimensions are in mm.
The dimensional tolerance is ± 0.4 mm
View in direction "A"
without clamping bracket
Hose
8 mm
50
110
B0046191 / Rev. 1.12
Ø 25
see fig.
"Spring travel"
ø20,5