Roland R1000 Series Manual page 105

B0046191 / Rev. 1.12
6.6.7 EDS file for EtherNet/IP
The EDS file contains the specific configuration data of the device. The data must be known to the
controller.
The manufacturers of the controller supply the tools for the integration of the EDS file into the
network. Roland Electronic does not supply such tools, because they have to be compatible with
the interface design of the controller.
The EDS file is supplied on a CD or can be downloaded from the Roland homepage.
6.6.8 Device Description file for EtherCAT
The Device Description file contains the specific configuration data of the device. The data must be
known to the controller.
The manufacturers of the controller supply the tools for the integration of the Device Description file
into the network. Roland Electronic does not supply such tools, because they have to be
compatible with the interface design of the controller.
The Device Description file is supplied on a CD or can be downloaded from the Roland homepage.
n is output as a collective message 0-sheet
Are the results or individual sensors are needed, these can be retrieved in the bytes 12 – 23.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
Note 24 Bytes I/O must be set.
Note 24 Bytes I/O must be set.
Manual
Communication with the PLC
105