Speedometer - Analog & Digital Readings - Scarab SB Series Owner's Manual

Table of Contents

Advertisement

overheat and check engine in real time. Close observa-
tion of these readings could save the engine from dam-
age, or possibly help prevent another type of mishap
which could spoil your outing. See an authorized
Scarab dealer for unit settings.
Figure B7: Information Center Gauges - Single Engine
Tachometers - Analog
Figure B8: Information Center Gauges - Twin Engines
Boat Systems - Section B
Notice: The following descriptions and images depict
single engine Information Center gauge features. The
Information Center gauge for twin engines follows the
same concept as well as having the same features.
At start-up, all LCD segments and indicator lights will
turn on for 3 seconds each time the information center
is activated. (Note: The emergency engine shut-off
switch must be engaged.) This allows the driver to
observe that they are all working properly.
Speedometer
A. Speedometer - Analog & Digital Readings
Speedometer - Analog
Speedometer indicates the speed of the boat in miles
per hour (MPH) or kilometers per hour (km/h). The
speed is indicated by the analog gauge and or by the
GPS indicator when the mode switch is set to GPS
speed. The speedometer is designed to be used like
an automobile speedometer. See Figures B9 & B10.
This automotive helm design helps give the driver a
familiar feel.
Fuel Gauge
Information Display
Figure B9: Information Center Gauge - Single Engine
NOTICE
Gauge is illuminated whenever the navigation
lights are used.
Do not adjust the display while riding. You
could lose control.
Tachometer
Owner's Manual Page 50

Advertisement

Table of Contents
loading

Table of Contents