General Maintenance Schedule - Scarab SB Series Owner's Manual

E - 15 GENERAL MAINTENANCE SCHEDULE
SERVICE
Engine and Instrumentation
Engine Maintenance
Inspect Exhaust System Hoses, Connections and
Components. (Condition & Leaks)
Exhaust System Flushing
(Note: Daily Flushing in Salt or Brackish Water)
Inspect Cooilng System Hoses, Connections and Coolant
Level
Propulsion System
Check Jet Pump Water Inlets and Jet Nozzles
Sacrificial Anodes
Check All Thru-Hull Fittings
Test Emergency Shut-Off Switch
Gauge Cleaning
Controls Systems
Throttle and Shift Adjustment
Neutral Safety Switch Test
Cable and Control Lubrication
Steering Systems
Steering Cable and Connection Inspection
Steering Nozzle Bushings
Electrical Systems
Inspect Battery Connections
Check Battery Water
Check Battey Switch Operation
ECM Connectors - Visual Inspection without Disconnecting
(Every 10 Hours in Salt Water Use.)
12 Volt Equipment Operation & Wiring Inspection
* Or as Required
Care and Maintenance - Section E
AT LAUNCH AND
FIRST
OPERATION*
As Recommended by the Engine Manufacturer - Refer to Engine Manual
As Recommended by the Engine Manufacturer (Refer to Engine Manual)
As Recommended by the Engine Manufacturer (Refer to Engine Manual)
As Recommended by the Engine Manufacturer (Refer to Engine Manual)
As Recommended by the Engine Manufacturer (Refer to Engine Manual)
Shaded areas indicate the time frame when service/inspection should be conducted.
BI-SEASONALLY
OR EVERY 6
25 HOUR CHECK
MONTHS OR
EACH SEASON*
EVERY 100
HOURS*
Refer to Section B
Before Every Use
Refer to Section B
Refer to Section B
Refer to Section B
Owner's Manual Page 125
SEASONALLY OR
EVERY 12
MONTHS OR
EVERY 200
HOURS*