Scarab SB Series Owner's Manual page 119

Table of Contents

Advertisement

The vinyl material used on the exterior upholstery
should be cleaned regularly with warm water and a
mild dish soap or Vinyl Finish Vinyl Cleaner
soft clean cloth, then rinse with a soft clean cloth. For
dirt buildup, spray Vinyl Finish Vinyl Cleaner
for approximately ten (10) minutes, then gently scrub
with a soft bristle brush. Be sure to thoroughly rinse
the vinyl after washing with mild dish soap or Vinyl
Finish Vinyl Cleaner
to remove all residue. Towel dry
®
the vinyl. Periodic spray ing of the seats with Lysol
Spray Disinfectant
will help retard mildew.
To further protect the vinyl from early degradation, use
303 Aerospace Vinyl Protectant
dry. 303 Aerospace Vinyl Protectant
applied every 3-5 weeks when boat is in use. Regular
cleaning with mild soap and water or Vinyl Finish
Cleaner will not remove the 303.
NOTICE
DO NOT apply vinyl protectants such as
Armorall
. The manufacturer does not
®
recommend this prod uct because it re moves
the oils present in vinyl that keeps vinyl soft.
A recommended "Cleaning Kit" includes:
Ivory Dishwashing Liquid
Clean, white towels
Soft bristle brush
Denatured Alcohol
H emisphere Ink Remover
(for ordering information call 800-247-9901)
V inyl Finish Vinyl Cleaner
(everyday cleaning & care, call 800-247-9901)
3 03 Aerospace Vinyl Protectant
(for ordering information call 800-247-9901)
T ough Duty Cleaner
distributor, call 800-537-8990)
Ammonia and hydrogen peroxide
To remove stains, follow the general guidelines listed
below and/or refer to the Step-by Step Cleaning
Instructions table:
Care and Maintenance - Section E
using a
®
, let soak
®
. Spray on, then wipe
®
should be
®
and water
®
-
®
-
®
- (to locate the nearest
General Stain Removal Guidelines
1. Basic Stains/Grease/Pencil/Dirt:
Ivory (mild) Dishwashing Soap
plied with a medium-soft brush or Vinyl Finish Vi-
nyl Cleaner
using a soft clean cloth, then rinse
®
with a soft clean cloth.
2. Tough Stains/Adhesive/Teak Oil/Rust:
T ough Duty Cleaner™; rinse with soap and water
or spray with Vinyl Finish Vinyl Cleaner
for approximately ten (10) minutes, then gently
scrub with a soft bristle brush. Thoroughly rinse
vinyl and dry.
NOTICE
To prevent possible damage to the vinyl, rinse
with soap and water after applying the Tough
Duty Cleaner™ or Vinyl Finish Vinyl Cleaner
Then rinse and dry.
3. Ink:
Denatured alcohol or Hemisphere Ink Remover
4. Mildew Stains:
To kill bacteria creating the mildew, vigor ously
brush the stained area with a 4-to-1 mixture of
water and ammonia; rinse thoroughly with water
and dry.
5. Tough Mildew Stains:
Apply a mixture of one (1) teaspoon am monia,
one-fourth (1/4) cup of hydrogen peroxide, and
three-fourths (3/4) cup of distilled water; rinse
with water and dry.
and water, ap-
, let soak
®
.
®
.
®
Owner's Manual Page 115

Advertisement

Table of Contents
loading

Related Products for Scarab SB Series

Table of Contents