Table of Contents
Advertisement
Operation
Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the wok unattended
whilst it is being used.
Rapid ignition system
The wok is supplied with a rapid ignition
system with the following features:
- Rapid ignition without the need to
hold the control.
- Automatic re-ignition
If the flame is extinguished, e.g. by a
draught, etc. the burner is automatic-
ally relit. If re-ignition is unsuccessful,
the gas supply is automatically cut
off (see "Ignition safety").
If there is a power outage, the auto-
matic re-ignition feature will not work.
26
Switching on
Press the control lightly and turn it
anti-clockwise to the large flame
symbol.
Then press it down firmly to open the
gas supply.
The ignition electrode will "click" and ig-
nite the gas.
If the burner does not ignite, turn the
rotary control to the (Off) position.
Air the room or wait at least 1 minute
before trying again.
If the burner does not ignite the
second time, turn the control back to
the position and see "Problem solv-
ing guide".
You might hear the burner re-igniting
as it switches on (1-2 clicks), for in-
stance, in the event of a draught.
Switching on during a power outage
If there is an interruption to the electri-
city supply, the gas can be ignited
manually, e.g. with a match.
Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
Hold the control pressed in and light
the gas at the burner with a match.
Keep the control pressed in for a fur-
ther 5-10 seconds and then release it.
Advertisement
Table of Contents
