Table of Contents
Advertisement
Installation
Safety instructions for installation
Risk of damage from incorrect connection.
Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.
Damage from falling objects.
Take care not to damage the ProLine element when fitting wall units or a cooker
hood above it.
Fit the wall units and the cooker hood before the ProLine element.
The room in which the ProLine element is installed must conform
to all relevant local and national building and safety regulations.
In the UK: GasSafe regulations.
The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.
A deep fat fryer must not be installed directly next to a gas hob or
a wok burner as the gas flames could ignite the fat in the fryer. It is
essential to maintain a distance of at least 288 mm between these
two appliances.
The ProLine element must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.
When installing the ProLine element, make sure that the gas pipe
and mains connection cable cannot come into contact with hot ap-
pliance parts.
The mains connection cable and any flexible gas connection pipes
must be installed in such a way so that they do not come into con-
tact with any moving kitchen parts (e.g. a drawer) after the ProLine
element has been installed, and that they cannot be subjected to any
mechanical action which could cause damage.
38
Advertisement
Table of Contents
