Berbel Skyline BDL 95 SK Operating And Installation Instructions page 75

Installation
Two persons hold the hood body and a third person carries
out the following tasks:
☞ Guide the support cable's mounting sleeves into the
appropriate threaded bolts on the ceiling mounting plate.
☞ Screw in the mounting sleeves until they stop on the
threaded bolts on the ceiling mounting plate.
☞ Ensure that all four support cables are tensioned.
The hood body can now hand freely on the support cables.
D ATTENTION!
Danger of property damage due to improper hanging on
the cables.
The cable cannot be wound up correctly due to obstructions
or irregularities on the cable guide.
☞ Ensure that the device is hanging freely and straight on
the cables.
☞ Plug the Wieland plug into the Wieland socket.
6002782_b – 14.09.2016
☞ Place the cable anchor into the bracket on the ceiling
mounting plate
☞ Feed the mains cable with the Wieland plug tightly from
the device to the ceiling mounting plate.
☞ Feed the mains cable with the Wieland plug through the
cable anchor.
☞ Tighten the screws on the cable anchor.
☞ Connect the earthing cable.
75