Format Of The Printer Output; Cleaning Of The Instrument - KARL DEUTSCH LEPTOSKOP 2042 Instruction Manual

14 Format of the printer output

In order to facilitate further processing it is possible to transfer the measuring
data via the serial interface directly into a PC. For instance, you can utilize
the standard transfer program of the operating system (e.g. Hyper Terminal
of a Windows OS).
Transfer format: 4800 Bd, 8 data bits, no parity, 1 stop bit.
CRLF
KARL DEUTSCH WUPPERTALCRLF
---- LEPTOSKOP 2042 ----CRLF
CRLF
•••1:•••••757.2•umCRLF
••19:••••0.1474•mmCRLF
••35:•••••30.06•milCRLF
••52:••••0.0543•inchCRLF
CRLF
---- LEPTOSKOP 2042 ----CRLF
------------------------CRLF
CRLF

15 Cleaning of the instrument

The front panel foil keypad is insensitive to soiling and can easily be cleaned
as well as the rest of the housing is.
Soiling should be removed with a cloth immediately after occurrence.
In most cases a cloth soaked with a smooth cleaning agent is all that is re-
quired.
Never use cleaning agents which will dissolve plastics or which are
mixed with sand or other abrasive materials, which might scratch the
surface of the display window.
Strictly avoid mechanical abrasion, scratching or scraping when cleaning the
instrument.
Please also ensure that no humidity soaks into the housing during cleaning.
11
only with software extension "Statistics & Data Memory "
Instruction Manual LEPTOSKOP 2042
Automatic output of the print header after activation of the inter-
face by means of the menu topics Settings->Printer->On
CRLF = Carriage Return and Line Feed
Output lines of readings will use the following format each (ex-
amples):
1) 3 space characters if there is 1 figure as consecutive number,
2 spaces characters if there are 2 figures as consecutive no.,
1 space characters if there are 3 figures as consecutive no.
2) consecutive number from 1 to 999, afterwards restart at 1
3) 3 space characters
4) readings use the following format each: xxxx.x µm, xx.xxx mm,
xxxx.xx mil or xx.xxxx inch. Non-significant leading zeros are
replaced by space characters (the example shows •).
5) space characters and measuring unit
6) the characters > or < to denote excess of limits
Automatic output of the print footer after de-activation of the in-
terface by means of the menu topics Settings->Printer->Off
CRLF = Carriage Return and Line Feed
11
Art. No. 7423.421
41