Fig. 6: Positioning device (left) and various positioning aids (right) for the micro probe
The image shows the complete unit. However, if you want to optimize
the positioning device according to your specific needs, the horizontal
arm of the positioning device together with a suitable probe specific
holder and the pneumatic layering unit (colour marked) is available
separately.
8.5.2
Placing pressure
Select the placing pressure so a secure contact to the surface is assured,
however, the does not become dented.
Soft coatings: Even a low placing pressure can cause surface defor-
mations in the case of low coating hardness. With soft coatings you
should place the probe with the least possible pressure. Probes with
an integrated spring-loaded guide sleeve should be placed without
spring assistance, if possible.
Instruction Manual LEPTOSKOP 2042
Art. No. 7423.421
15