Putting Into Operation; Insertion Of Battery, Change Of Battery - KARL DEUTSCH LEPTOSKOP 2042 Instruction Manual

8

Putting into operation

8.1 Insertion of battery, change of battery

open:
(a)
(c)
close:
(d)
Fig. 4: Battery compartment on the rear of
the instrument
Instruction Manual LEPTOSKOP 2042
10
(b)
(e)
Prior to first putting into opera-
tion you need to insert batteries.
For this purpose two 1.5 V al-
kali-manganese cells of size AA
(Mignon) are part of the delivery.
Only change batteries if the
gauge is switched off.
You need not to remove the
protective holster when chang-
ing the batteries.
Use the knurled screw to open
the battery compartment on the
rear of the instrument (a).
Remove the cover of the battery
compartment (b+c). Now the
batteries are freely accessible.
The graphical symbol in the bat-
tery compartment informs on the
proper orientation when insert-
ing the batteries.
Re-assembly is made in reverse
order.
For easy assembly, please en-
sure that the battery cover is
not pressed down (e) before it
is inserted into the bottom slot
between housing and protec-
tive holster (d).
Art. No. 7423.421