Controls, Interface And Cable - KARL DEUTSCH LEPTOSKOP 2042 Instruction Manual

6

Controls, interface and cable

Instruction Manual LEPTOSKOP 2042
1 Display
2 Keyboard
3 Data interface for
a) Cable 1657.311 to connect to the 9-pin RS232 in-
terface of a PC.
b) Cable 1657.312 to connect to the USB interface of
a PC.
c) If the cable 1657.311 is completed with the adapter
1657.310 you can connect the printer 6010.001.
4 Probe connector
(marked with a red dot)
Position the probe plug so both red dots, each on
the plug and on the socket, point to the same di-
rection.
5 Type label
6 Pop-up stand
7 Battery compartment
Art. No. 7423.421
7