10.5.3 Analog Display
Select the analog display, if you want to watch the measurements on a con-
ventional analog indication scale. The digital reading will be shown addition-
ally.
Use the arrow keys to switch in turn between the digital indication of
readings (statistics or normal display) and the analog display: Normal
display -> statistics display -> analog display -> normal display -> sta-
tistics display -> ... etc.
Range AUTO
Range Fix
Range Limits
Instruction Manual LEPTOSKOP 2042
The scale division is automatically selected to match the
measured value.
Based on the first measurement after start of this menu
topic a suitable display range is chosen. The start and
end values of this become fixed as scale start and end.
The scale limits are equal to the current range limits
(see 10.2.2).
Fig. 14: Analog
display
As an example the opposite image
shows the Analog Display in mode
"Range Limits". The current mode is
shown top left in the display:
Auto:
Range AUTO
Fix:
Range Fix
Limit:
Range Limits
Art. No. 7423.421
27