Table of Contents
Advertisement
10.5 System Settings
10.5.1 Printer
In addition to the display indication the readings can be exported via the in-
terface (see section 6, control 5), e.g. for PC
On:
Off:
10.5.2 Unit
Select the unit which is used by the readings on the display and for output
via the interface line.
Selections: µm (= 1/1000 mm), mm, mil (1/1000 inch) and inch.
5
More information on the data output format can be found in section 14.
Instruction Manual LEPTOSKOP 2042
26
In addition to the display the readings with print head
and print foot is exported via the data interface (5).
Transfer format: 4800 Bd, 8 data bits, no parity, 1 stop
bit.
Fig. 13: Example
printout
Interface output is switched off.
5
or printer).
Automatic output of the print head af-
ter activation of the interface line via
the menu topic System Settings ->
Printer -> On
The output of readings comes with
a) consecutive number (1 to 9999)
b) measured value
(dot = decimal separator)
c) Unit (um, mm, mil, inch)
Automatic output of the print foot
when switching the instrument off and
after deactivation of the interface line
via the menu topic System Settings ->
Printer -> Off.
Art. No. 7423.421
Hide quick links:
Advertisement
Table of Contents
