KARL DEUTSCH LEPTOSKOP 2042 Instruction Manual page 24

Create File
Rename File
Delete File
File Info
Create Folder
Instruction Manual LEPTOSKOP 2042
24
Via this topic you can create a file to store readings.
Use the alphanumeric input to specify a file name.
When confirming the file name via OK the file is created
in the currently opened folder.
After selection of a file the alphanumeric input window
will show where the current filename is suggested by
default and can be renamed. When confirming via OK
the file gets stored under the altered name.
This topic is used to delete one file of readings from the
memory of the instrument. After invoking of this menu
topic you can use the arrow keys to select the file to be
deleted.
Deletion of files only can be executed if all files
are closed. If required select the menu topic
"Close File" to do so.
The file info as mentioned above under "Open File" can
be shown here separately.
After input of a folder name via the alphanumeric input
you should strike OK to add a new folder to the memory
structure.
probe article no. and probe se-
rial number is shown.
Striking the key
will open the file.
Art. No. 7423.421
once again