KARL DEUTSCH LEPTOSKOP 2042 Instruction Manual page 19

10 Menu: Selections and functions in detail
10.1 Calibration
Information on the calibration modes and possible selections can be found in
section 12.
10.2 Measure
10.2.1 Measuring mode
Determines the number of readings gained after placing of the probe.
Single:
Continuous:
Local average:
4
the significant test field represents a surface field, that is typical for the object of measurement with regard
to the substrate qualities as well as the coating application and coating specifications
Instruction Manual LEPTOSKOP 2042
One measured value after placing of the probe.
Continuous acquisition of readings after placing of the
probe (1 reading per second approx.).
Depending on the given measurement situation it
may be possible that the last reading in measur-
ing mode "Continuous" is shown only just before
lift-off of the probe.
only with module
With this testing method the significant test field
subdivided into small individual test fields, on which in
each case a given number of measurements is carried
out (example in
test fields the arithmetic mean value is calculated (ex-
ample in Fig. 7: individual mean values X1 to X12) an
indicated as final measured value and is stored – if the
data memory is activa
n1 n4 n7 n1 n4 n7 n1
X1 X2 X3
n2 n5 n8 n2 n5 n8 n2
n3 n6 n9 n3 n6 n9 n3
n1 n4 n7 n1 n4 n7 n1
X5 X6 X7
n2 n5 n8 n2 n5 n8 n2
n3 n6 n9 n3 n6 n9 n3
n1 n4 n7 n1 n4 n7 n1
X9 X10 X11 X12
n2 n5 n8 n2 n5 n8 n2
n3 n6 n9 n3 n6 n9 n3
Fig. 7: Significant test
field and allocation into
individual test spots
Fig. 7: n1 to n9). For these individual
ted.
When starting this menu
n4 n7 n1 n4 n7
X4
n5 n8 n2 n5 n8
topic first of all the number
n6 n9 n3 n6 n9
of measurements per indi-
n4 n7 n1 n4 n7
X8
vidual test field is entered
n5 n8 n2 n5 n8
n6 n9 n3 n6 n9
(n ).
x
n4 n7 n1 n4 n7
Up to 20 measurements
n5 n8 n2 n5 n8
per individual test field are
n6 n9 n3 n6 n9
possible.
4
Art. No. 7423.421
is
d
19