KARL DEUTSCH LEPTOSKOP 2042 Instruction Manual page 30

10.5.9 Lock Keyboard
You can enter an instrument-specific 6 digit code number to prevent the in-
strument settings from being altered via the keyboard. If the keyboard lock is
active, you will need to enter the code to call the menu. When entering the
code number again, the keylock is suspended again.
10.5.10 Module Code
By entering the module code you are capable of unlocking an additionally
purchased software extension. If you have purchased the software extension
together with the instrument it is activated ex works.
10.5.11 Set Clock
Here the alphanumeric input window can be used to set the internal clock,
the time and data information of which is stored – for instance – in the file of
readings.
Format of the time: ss:mm
Format of the date: DD.MM.YYYY
10.5.12 Language
Select one of the available operating languages
Deutsch
English
Once the language is selected it remains selected even after reset to
factory settings (as described in section 10.5.13).
10.5.13 Load Factory Set.
You can recall the factory settings, which are selected ex woks when the in-
strument is delivered. The factory settings contains default menu topics (see
section 9).
Factory Set. Ok:
6
Only with software extension "Statistics & Data Memory"
7
The code for Lock Keyboard is specific to the instrument and equal to the unlock code for the software ex-
tension (Module Code). On delivery it is recorded in a separate document.
8
The module code is specific to the instrument. On delivery it is recorded in a separate document.
9
The available language may differ depending on instrument and/or customer.
Instruction Manual LEPTOSKOP 2042
30
6 7
8
Français Italiano
Español Português
Strike OK to load the factory settings
9
:
Svenska Czech
Polski Română
Art. No. 7423.421