Table of Contents
Advertisement
6.16 FTP Server / Client setup
You can set up for FTP Server / Client.
① After turn MG-350SHD on, press [SETUP] button and go to
[SETUP] page.
< How to setup >
② Go to the 2
button then you will get the above page.
③ By using arrow buttons, go to the bottom setup.
By using arrow & number keys, set the configuration and press
[ENTER] for saving of the configuration.
④ Press [SETUP] button for the saving of the configuration.
i) FTP Client Local Disk : Indicate the HDD path that you will use
FTP client disk.
ii) MediaGate FTP Server Setting : Decide the Mediagate as
FTP server.
iii) FTP Server Disk : Indicate the HDD path that you will use
FTP Server disk.
iv) Server ID : make the Server ID
v) Server Password : make the password to access the FTP
server.
vi) Server Port : The default is 21 and you can select a
preferable port number.
64
page and select [FTP] icon and press [ENTER]
nd
Advertisement
Table of Contents
