Protocol - AL Tech MediaGate MG-350SHD User Manual

6.15 Protocol

You can set up for protocol.
① After turn MG-350SHD on, press [SETUP] button and go to
[SETUP] page.
< How to setup >
② Go to the 2
[ENTER] button then you will get the above page.
③ By using arrow buttons, go to the bottom setup.
By using arrow & number keys, set the configuration and press
[ENTER] for saving of the configuration.
④ Press [SETUP] button for the saving of the configuration.
i) Select Protocol : Select one
ii) SAMBA Server Address Setting : Select Auto or Manual
iii) SAMBA Server Address : Put the server address
iv) NFS Server Address : Put the NFS server address
v) NFS Shared Folder : Indicate the shared folder path.
vi) FTP Address : Put the FTP address
vii) FTP ID : Put the FTP ID
63
page and select [Protocol] icon and press
nd