Basic Setup; Video Setup - AL Tech Mediagate MG-35 Manual

3.2 Basic Setup

3.2.1 Video Setup

This is guide for setting video output of MG-35. You have to setup MG-35's video output mode same as TV set's video
input mode.
When you can not see normal screen after connecting video cable, check followings,
1. "TV "– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. "MG-35" – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output signal is
changed.
3. After you see normal screen, you have to save video configurations of MG-35.
TV Video
Input Mode
Normal Video
S-Video
Component 480i
Component 480p
Component 720p
Component 1080i
NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.
MG-35 Video
Output Mode
TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
TV Out: NTSC C/YPbPr
(HD Component OFF)
TV Out: PAL C/YPbPr
(HD Component OFF)
HD Component Out On 480p
HD Component Out On 720p
HD Component Out On 1080i
Connection Jack
of TV, MG-35
CVBS or Composite Jack
(Generally Yellow Jack)
S-Video Jack
Component 3 Jack
* Y(Green), Pb(Blue), Pr(Red)
30
Video Cable Type
Yellow RCA Cable
(Supplied)
S-Video Cable
* Black rounded
Component Cable
* Y(Green), Pb(Blue), Pr(Red)