5. Connect to External AV Device
5.1 Connect Video Cable
MG-350SHD supports 4 type of video output; "Composite, S-video, Component, HDMI". Use video connection that your TV
supports. Normally, TV supports composite video connection, and this package supplies composite video cable.
√ When you can not see normal screen after connecting video cable, check followings,
1. "TV "– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual.
2. "MG-350SHD" – Switch to Video Output Mode: Press [TV OUT] button repeatedly. Whenever press [TV OUT], video output signal is changed.
3. After you see normal screen, you have to save video configurations of MG-350SHD .See "7.1 Video Setup".
① Composite: Yellow RCA cable. (Supplied)
② S-Video: Black rounded cable (not supplied)
S-VIDEO
③ Component: Y, Pb, Pr component cable (not supplied)
Red
(Pr)
Blue
(Pb)
Green
(Y )
④ HDMI : HDMI Cable (not supplied)
HDMI
45
Red
Connect to Audio RED of TV
(Wright)
Connect to Audio White of TV
White
(Left)
Connect to Composite (CVBS)
Yellow
Jack of TV
(CVBS)
Connect S-Video Jack
of TV
Green
Connect Y Jack of TV
(Y )
Red
Connect Pr Jack of TV
(Pr)
Blue
Connect Pb Jack of TV
(Pb)
Connect HDMI Jack of TV