Format Built-In Hdd Via Usb; Windows 98Se, Me - AL Tech MediaGate MG-350SHD User Manual

1.2 Format Built-in HDD via USB

If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the following
guide. * If the hard disk drive is al ready formatted, see "1.3 Copy Data via USB".

1.2.1 Windows 98SE, ME

1) Install Windows 98 Driver. Find the driver at Windows
98 CD>MediaGate MG-350SHD>English>Windows 98
Driver Directory. After finishing installation, Connect MG-
350SHD to PC via USB cable, and plug power cable of MG-
350SHD.
2) Select [Start→Program→Accessories→MS-DOS
Prompt] on Windows.
3) Type "fdisk" command at Command Prompt window
and press [Enter].
4) Type the "Y" at the "Do you wish to enable large disk
support (Y/N)" and press [Enter].
5) Select "5. Chang current fixed disk drive" and press
[Enter].
6) Type the last Disk number in 0% usage.
7) Select "1. Create DOS partition or Logical DOS Drive"
and press [Enter].
12