Network Setup - AL Tech MediaGate MG-350SHD User Manual

6.3 Network Setup

It is possible to obtain IP address automatically from DHCP Server or IP Router, or set the specific IP address. Check your network
environments.
Note
DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router.
DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server or IP Router, you
have to use this option. Just write IP address and Subnet mask.
① Turn on MG-350SHD and press [SETUP] on Mode
Selection screen.
< 'DHCP Support On' Setup Procedure >
② Move to 'Network' icon and press [OK]. Setup box will be
displayed under icon menu.
③ Select 'DHCP Support-ON' and press [OK].
④ Finally, press [SETUP] again for saving configurations.
√ Check the obtained IP address
Press [INFO] on Mode Selection screen, and It is possible to
current obtained IP address from DHCP server.
51