1.2.3 Windows XP
1) Connect MG-350SHD to PC via USB cable, and plug
power cable of MG-350SHD.
2) Click [Settings > Control Panel > Administrative Tools >
Computer Management>Disk Management] on Windows.
If you can not find Administrative Tools at Control Panel,
click " switch to classic view" in left – up corner on
screen.
3) If the [Disk Signature and Upgrade Disk Wizard] starts,
click [Next] to progress for finishing the wizard. If this wizard
not started, right click the marked left area of unallocated
drive at no 4. figure and start the wizard.
4) After finishing the [Disk Signature and Upgrade Disk
Wizard], Right-click the 'Unallocated' Drive. And then, click
[Create Partition].
Right Click for
starting
Disk
Wizard.
5) Click [Next] at the New Partition Wizard.
6) Check [Primary Partition] and click [Next].
7) Type number that you want to use and click [Next].
8) Assign a drive letter and click [Next].
16