Copy Data Via Usb; Windows 98Se - AL Tech MediaGate MG-350SHD User Manual

Wireless hd player

Table of Contents

1.3 Copy Data via USB

It is possible to use as a external USB hard disk drive in case of inserting hard disk into MG-350SHD. You can copy data from your

PC to built-in HDD of MG-350SHD via USB. It is possible to play media files at the hard disk on TV set.

* When connecting PC, you have to connect power cable of MG-350SHD.

First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD>MediaGate MG-

350SHD>English>Windows 98 Driver Directory. After finishing installation, Connect MG-350SHD to PC via USB cable, and plug power cable of MG-

350SHD.

1) After installing the driver, connect MG-350SHD and plug

power cable. And then, check the driver installation at

Windows [Start > Settings>Control Panel > System >

Device Manager > Hard disk controllers > Hi-Speed USB-

IDE Bridge Controller].

2) Check 'My Computer' or 'Explorer', there should be a new

volume. You can copy any data to this volume.

If a new volume is not be appeared, check HDD format or not,

and HDD file system. Windows 98SE only detect FAT32 file

system.

3) After copying data, remove MG-350SHD with using

remove icon

at Windows right-down corner. If you

don't follow this procedure, data and MG-350SHD may have

damage.

Table of Contents