Leds - ADF Web HD67618-A1 User Manual

Industrial Electronic Devices

LEDS:

The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED
1: ON [supply voltage ]
(green)
2: Device State (green)
3: Modbus communication
(green)
4: S7comm communication
(green)
5: Not used (green)
6: Not used (green)
ADFweb.com Srl – IT31010 – Mareno – Treviso
Normal Mode
ON: Device powered
OFF: Device not powered
Blinks slowly (~1Hz)
Blinks when a Modbus TCP request is received
Blinks when a S7comm response is received
OFF
OFF
User Manual S7comm / Modbus TCP Slave
Document code: MN67618_ENG Revision 1.000
ON: Device powered
OFF: Device not powered
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
INFO: www.adfweb.com
Page 9 of 25
Boot Mode
Phone +39.0438.30.91.31