User Manual S7comm / Modbus TCP Slave
Document code: MN67618_ENG
Revision 1.000
Page 11 of 25
Industrial Electronic Devices
USE OF COMPOSITOR SW67618:
To configure the Converter, use the available software that runs with Windows called SW67618. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67618, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67618
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31