Chapter 1 - Operation; Introduction; General; Handling - Magic Mobility R-NET CJSM2 User Manual

r-net user guide
Chapter 1 – Operation
1

INTRODUCTION

The operation of the R-net wheelchair control system is simple and easy to understand. The control system
incorporates state-of-the-art electronics, the result of many years of research, to provide you with ease of use
and a very high level of safety. In common with other electronic equipment, correct handling and operation of
the unit will ensure maximum reliability.
Please read this chapter carefully - it will help you to keep your wheelchair reliable and safe.
2

GENERAL

An R-net control system comprises a minimum of two modules - Joystick Module and Power Module.
Because of the modular design, the depth of the control system can be greatly increased. The following
diagram shows the basic set-up.
2.1

Handling

Avoid knocking your control system and especially the joystick. Be careful not to strike obstacles with the
control system or joystick when you drive. Never drop the control system.
When transporting your wheelchair, make sure that the control system is well protected. Avoid damage to
cables.
2.2

Operating conditions

Your control system uses industrial-grade components throughout, ensuring reliable operation in a wide
range of conditions. However, you will improve the reliability of the control system if you keep exposure to
extreme conditions to a minimum.
Do not expose your control system or its components to damp for prolonged periods. If the control system
becomes contaminated with food or drink clean it off as soon as possible.
2.3

Cleaning

Clean the control system and the joystick with a cloth dampened with diluted detergent. Be careful when
cleaning the joystick and screen.
Never use abrasive or spirit-based cleaners.
7
5940A R-net User Guide DCR1266 magicmobility.com.au