Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Magic Mobility Frontier V6
Summary of Contents for Magic Mobility Frontier V6
- Page 1 Join the Magic Mobility Facebook You Tube communities...
-
Page 2: Table Of Contents
Control Panel ............................ 25 6.7.2 LED Control System Indication ....................26 6.7.3 LED Joystick Troubleshooting ...................... 26 LCD Joystick Module ..........................28 Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 2 of 65... - Page 3 Head Office and Operations ........................ 57 Appendix A – ISO 7176-19 ..........................58 Appendix B – Electromagnetic Interference (EMI) ..................64 Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 3 of 65...
-
Page 4: Important Warranty Information
Motors and brakes ONE YEAR WARRANTY The Magic Mobility wheelchair is under full warranty for the first twelve (12) months from the commencement date. This warranty does not detract from, but is in additional to your legal rights. WARRANTY EXCLUSIONS General wear and tear (tyres, batteries, upholstery, scratches, damage etc) Upon acceptance of goods at delivery the purchaser accepts the “Terms &... -
Page 5: Power Wheelchair Owner's Manual
155 kgs /340lbs and 182kgs/400lbs respectively. Magic Mobility is not liable for damage to property or personal injury arising out of unsafe use of a power chair. Magic Mobility is also not liable for any property damage or personal injury arising out of the failure of any person and/or user to following the instructions and recommendations set forth in this manual. - Page 6 Figure 1 - Frontier V6 Serial Number Location Figure 2 - Extreme X8 Serial Number Location Figure 3 - Frontier V4 Serial Number Location Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
-
Page 7: Safety And Damage Warnings
Magic Mobility Dealer before operating the wheelchair. Buying a Magic Mobility wheelchair opens up a whole new World and we are keen for you to explore new possibilities. However, we strongly recommend that when learning your driving capabilities, the capabilities of your wheelchairs and learning where potential hazards may be;... -
Page 8: Motor Vehicle Transport
All Magic Mobility electric wheelchairs have been tested to and conform to the requirements of ISO 7176-19. The Frontier V6 Mid Wheel Drive and Extreme X8 also comply with the requirements of ANRI/RESNA WC/19; further details of this are available on request. -
Page 9: Stairs And Escalators
STOP! Trying to negotiate stairs or escalators may result in damage to your power chair. Transportation Products for your wheelchair If it is necessary to use a transportation product such as a vehicle hoist or lift, Magic Mobility recommends that the manufacturer’s instructions and specifications are closely reviewed before using that product. - Page 10 Figure 4 - Frontier V6 Correct and Incorrect Approaches to Obstacles Figure 5 – Extreme X8 Correct and Incorrect Approaches to Obstacles Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 10 of 65...
- Page 11 Figure 6 - Frontier V4 FWD Correct and Incorrect Approaches to Obstacles Figure 7 – Frontier V4 RWD Correct and Incorrect Approaches to Obstacles Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
-
Page 12: Climbing Or Descending An Incline
Maximum Recommended Incline Most public access ramps have a maximum gradient 1 in 14 (AS1428.1). Therefore, Magic Mobility recommends that the maximum slope of an incline you attempt to safely ascend or descend on your power chair does not exceed a 1 in 14 gradient. -
Page 13: Removable Parts
WARNING! Ensure your positioning belt is fastened securely and correctly. Serious personal injury may result if you fall from the power chair. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 14: Weather Precautions
Your power chair has numerous areas which may be trapping/pinching hazards. Always exercise caution when using your power functions and avoid putting body parts or objects into the mechanisms during operation. Serious personal injury will occur. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 15: Specifications
4 Specifications The Frontier V6 A Frontier V6 power chair is depicted below. This will help you identify some of the features referred to throughout this manual. The Extreme X8 An Extreme X8 power chair is depicted. This will help you identify some of the features referred to throughout this manual. -
Page 16: The Frontier V4 Front Wheel Drive
A Frontier V4 Rear Wheel Drive (RWD) power chair is depicted. This will help you identify some of the features referred to throughout this manual. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 17: Standards Testing
Standards testing The Frontier V6 and Extreme X8 have been tested to AS/NZS 3695 and ISO 7176 standards and meet all requirements of a class B medical device. This includes section 16: resistance to ignition. Information regarding the performance attributes and controlled testing results of the power chair may be obtained from the power chair manufacturer. -
Page 18: Operating Instructions
Positioning If your power chair was configured at your Magic Mobility Dealer, please consult your health care professional before changing the seat position or making any other adjustment. Some adjustments may degrade your power chair’s performance and safety by changing its centre of gravity. -
Page 19: Electrical Safety Protection
In the case of a blown fuse, the chair will not drive and you will need to contact your Magic Mobility dealer for repair / replacement Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©... -
Page 20: Seat Tilt Option - If Fitted
STOP! Do not put your fingers, toes or any other body part or object into the scissor mechanism while it is operating. Serious personal injury will occur. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©... -
Page 21: Transfer Tilt - If Fitted (Frontier Only)
If your chair has a slope sensor and a function does not seem to be operating Drive the lift function downwards until it stops in the home position; Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 22: Steering Lock Option - If Fitted (Extreme X8 Only)
WARNING! When the steering lock is engaged, only drive the wheelchair forwards and backwards. Attempting to drive the wheelchair normally with the steering lock engaged could cause serious damage. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 23: Joystick Controls
Controller program The controller program affects speed, acceleration, deceleration, and braking. The drive mode settings are pre-set at the factory. If your Magic Mobility Dealer changes these settings, please make note of these changes. WARNING! Do not attempt to reprogram your chair. Only the power chair manufacturer, an authorised representative of the manufacturer, or a trained service technician should program the controller. -
Page 24: Precautions For Use
If the controller or other crucial components are known to require repair. For contact information please visit www.pgdt.com Magic Mobility accepts no liability for losses of any kind arising from unexpected stopping of the wheelchair or improper programming of the control system, improper use of the wheelchair, improper use of the control system or if any of the criteria detailed in this document are not met. -
Page 25: Led Joystick Module
When activated the LED will flash. Actuator Indicator: This LED set displays which Actuator channel is currently being controlled when the Control System is in Actuator Mode Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 26: Led Control System Indication
Contact your service agent The wheelchair is being prevented from driving by an external signal. The exact cause will depend on the type of wheelchair you have Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... - Page 27 If the problem persists after you have made the checks described below contact your service agent. *If Motor Swap has been enabled, then left and right hand references will need transposing. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©...
-
Page 28: Lcd Joystick Module
When activated the LED will flash. This button activates and de-activates the wheelchairs Right Indicators lights. When activated the LED will flash. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 28 of 65... -
Page 29: Lcd Screen Control System Indication
Actuator Mode: Displays the sections of the chair currently selected for movement. Bluetooth Mode: When Bluetooth Mode is entered the following screen will be displayed. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 29 of 65... - Page 30 Diagnostic Screen Diagnostic Screen: When the control safety circuits have operated to prevent the wheelchair from moving, a diagnostic screen is displayed Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 30 of 65...
-
Page 31: Basic Programming And Set-Up
Profiles. Choose ‘Auto’ for a background which is blue for slower indoor profiles and white for faster outdoor profiles Exit Exits the Settings Menu back to normal operation Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 31 of 65... -
Page 32: Cjsm2-Bt Joystick Module
These buttons operate the lighting functions: Hazards, Lights, Left Indicator and Right Indicator. The function of each button is illustrated by an icon displayed on the LCD screen next to the button. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©... -
Page 33: Lcd Screen Control System Indication
LCD Diagnostic LED This LED indicates the control system is switched on in the event of an LCD screen failure. Turn the control system on and off, if the problem persists contact your Magic Mobility Dealer LCD Screen Control System Indication 6.9.2... - Page 34 If the wheelchair is being inhibited from driving, this red symbol will be flashing Latched Drive: symbol displayed if the control system is in latched drive Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
- Page 35 Control System Locked: This symbol is displayed if the control system is locked Diagnostic Screen: When the control safety circuits have operated to prevent the wheelchair from moving a diagnostic screen is displayed Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
-
Page 36: Basic Programming And Set-Up
Diagnostics allows the user to read diagnostic information from the control system Exit Exits the Settings Menu back to normal operation Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 36 of 65... -
Page 37: Pairing The Cjsm-Bt
Bluetooth in the setting menu, the devices can be disabled through a right deflection of the joystick. Note re-pairing is not required if the device is subsequently turned on. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©... -
Page 38: Cjsm2-Bt Infra Red (Ir)
If a Command is ticked this means it has a stored IR Code. If there is no tick, then there is no stored IR Code for that Command Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... - Page 39 Now the On/Off command will have a tick and 3 dots beside it, showing a learnt sequence Figure 18 – IR Learnt Sequence Screen Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
- Page 40 To delete all IR Codes for an appliance, select Delete All Codes and turn the CJSM2-BT off and on to ensure correct operation Figure 20 – Deleting individual IR Codes (left) and sets of IR Codes for an Appliance (right) Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
-
Page 41: Diagnostics
Repairs to any joystick should only be conducted by authorised service agents. An incorrect or badly effected repair could result in an unsafe set-up of a wheelchair. Magic Mobility accepts no liability for losses of any kind arising from an incorrect or badly effected repair. -
Page 42: Locking The Control System
Socket on the Joystick Module. A short beep will be heard. The wheelchair is now locked. The following screen will be displayed, the next time the Control System is switched on. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 43: Care
Use a damp cloth and washing up liquid mixed with water. Do not use abrasive or spirit based cleaning agents. Also See Section 8 Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 44: Bluetooth (If Installed)
R-net input device commands (joystick nudges) to control or access any of the applications of the iDevice. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©... -
Page 45: Batteries & Charging
Initially you may find that you have to limit the amount of use during the day for the full charge to be achieved. The Battery capacity is reduced when new, this is normal and will improve during the run-in process. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 46: Charging Procedure
You should charge the batteries immediately if the battery gauge shows just red, either steady or flashing slowly. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 46 of 65... -
Page 47: Public Transportation
If your battery gauge reading seems to fall more quickly than usual, your batteries may be worn out. When you replace worn out batteries, fit the type recommended by Magic Mobility. If you use another type, the battery gauge may be inaccurate. -
Page 48: Care & Maintenance
STOP! Do not use parts, accessories, or adapters other than those authorised by Magic Mobility. This may void your warranty and cause damage to your power chair. General Guidelines Avoid exposing your power chair to any type of moisture where possible (rain, snow, mist, salt water, or wash). -
Page 49: Frontier Tyre Inflation
All Tyres Black, Low Pressure, Knobby 165 kPa MAX 8psi (55kPa) User Weight (kg) Advisory Tyre Pressures for user weight (Metric) Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 49 of 65... -
Page 50: Tyre Puncture Repair
If you have the Magic Mobility knobby wheel Puncture Resistant Kit (tyre liner + slime), you are less likely to experience a puncture. If you do not yet have this kit, you can contact your Magic Mobility Dealer to have the kit fitted to your current wheels. When the time comes, the kit can be switched into your new tyres. -
Page 51: Cleaning
When returning from your drive all parts should be wiped down with warm water on a cloth. Under no circumstances should the wheelchair Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©... -
Page 52: Preventative Maintenance
Storage Store your Magic Mobility power chair in a warm dry environment. If you do not use your power chair regularly, it is recommended that the batteries be charged at least once per week. -
Page 53: Weekly Checks
Tyre Pressure and Wear: Check the tyre pressure is to the specification as detailed in section Frontier Tyre Inflation 9.3.1 Check the tyres for wear STOP! If any of the above checks reveal a problem, please see your Magic Mobility Dealer for repair. -
Page 54: Servicing
STOP! If non-certified individuals perform any work on these units, the warranty is void and damage to the equipment could occur. Do not modify, or have your power chair modified in any way not authorised by Magic Mobility. Unauthorised changes constitute remanufacturing of the wheelchair. The person or group who make the changes will have full liability of the wheelchair under the Therapeutic Goods Act (TGA). -
Page 55: Technical Specifications
Battery Charger Brakes Electromagnetic (manual brakes can be fitted if required) Freewheel Mode Tyres 355mm (14”) (all-terrain low pressure knobby tyres) Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 55 of 65... -
Page 56: Frontier V4
Tyres Varies by model – see website www.magicmobility.com.au Magic Mobility is not able to provide technical specifications for non-Magic Mobility parts, nor can we guarantee performance according to the table above. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4... -
Page 57: Non Oem Parts
Non OEM parts, assembly by a 3 party and customisation If non Magic Mobility parts are fitted to the wheelchair, Magic Mobility is not responsible for their compatibility, performance or instructions for use. Please refer to the relevant manufacturers manuals for appropriate use. Magic Mobility wheelchairs pass AS3695 in a standard wheelchair configuration, all variants and non Magic Mobility components are not tested. -
Page 58: Appendix A - Iso 7176-19
Appendix A – ISO 7176-19 The wheelchair is not provided with a wheelchair anchored belt restraint as standard. It must be requested at the time of ordering the wheelchair or it can be retrofitted later on by a Magic Mobility Dealer. - Page 59 Figure 22 - X8 tie down locations Figure 23 - V4 FWD tie down locations Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility Page 59 of 65...
- Page 60 Magic Mobility supply either a 600mm or 700mm compatible crashworthy wheelchair anchored pelvic belt restraint when ISO 7176-19 tie downs are requested. This belt is designed to accommodate use on either side of the vehicle.
- Page 61 Belt restraints should be adjusted as tightly as possible, consistent with user comfort. Belt restraints should not be worn or twisted in a manner that reduces the area of contact of the belt webbing with the occupant Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility...
- Page 62 The mass of a Magic Mobility electric wheelchair can range between 120 and 190Kgs depending upon options fitted. A variety of options have been tested, please contact Magic Mobility for details This wheelchair was tested with a 76Kg/152lbs ATD. Occupants with a higher weight are at increased risk during an accident.
- Page 63 Care should be taken when applying the occupant restraint to position the seat buckle so that the release button will not be contacted by wheelchair components during a crash Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©...
-
Page 64: Appendix B - Electromagnetic Interference (Emi)
This can affect powered wheelchair movement and braking. Therefore, the warnings listed below are recommended to prevent possible interference with the control system of the powered wheelchair Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 © Magic Mobility... -
Page 65: Magic Mobility
Caution: Federal law restricts this device to sale by or on the order of a practitioner licensed by the law of the State in which he/she practices. Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4 ©...
Need help?
Do you have a question about the Frontier V6 and is the answer not in the manual?
Questions and answers