Override - Paragon EL71 General Instructions Manual

NONE indicates that this holiday (span) number (1-10) is not used (no holiday schedule
has been selected). Press the NEXT key to program this holiday (span) or press the +/-
keys to move to other holiday (span) numbers.
Program the beginning month and date for holiday duration #1.
Program the ending month and date for holiday duration #1. Then select a holiday sched-
ule A, B or C. To remove a holiday duration, select none of the schedules.

Override

Keyboard Override header. This mode is reached by pressing the OVERRIDE key from
the RUN mode. Press the NEXT key to continue in this mode or press the RUN key to
exit this mode without affecting a change to the load status.
This screen shows the status of both channels (one channel for the EL71) on the bottom
line of the display. If the channel number is flashing, the channel is currently overridden. If
it is flashing mostly on, the channel is overridden on. If it is flashing mostly off, the channel
is overridden off. The channel # currently pointed to will be flashing. The current event for
this channel is shown below the channel # (e.g. ON, OFF, dUR2, CYC4, SC03, NONE).
Press the OVERRIDE key to toggle the channel status until the next event. Press the RUN
key to cancel an override (will not work for timed external overrides). Press the +/- keys to
select the other channel. To exit the override mode without making a change, press the
PREVIOUS or NEXT key to return to the override header, then press the RUN key.
32