Programming:
STEP KEY
1.
RESET
2.
NEXT
3.
PROGRAM
4.
NEXT,+,-
5.
PROGRAM
6.
NEXT
7.
NEXT
8.
+
9.
NEXT
10.
NEXT
11.
-
12.
NEXT
13.
NEXT
14.
NEXT
15.
+
DESCRIPTION
Clears control's memory. Control is finished initializing when # stops flashing
(about 6 seconds).
Display shows MAINtAin (maintained relay operation).
Display shows TIME header.
Use these keys to set time, date and daylight savings time information.
Press PROGRAM key to step through headers until EVNT (event header) is
reached.
First event is shown with event # flashing.
Event type is flashing.
Select OFF event type.
Channel no.1 is flashing. This is the desired channel.
Hours are flashing.
Roll backward to select 5 PM.
Minutes are flashing. 00 is desired value.
SUN is flashing. NO is displayed
MON is flashing. NO is displayed.
Change NO to YES. Step through remaining days and select YES for TUE,
WED, THU, FRI and HOLIDAY A.
37