Paragon EL71 General Instructions Manual page 39

STEP KEY
33. NEXT
34. NEXT
35. PROGRAM Advance to HOL (holiday) header.
36. NEXT
37. -
38. NEXT
39. NEXT
40. -
41. NEXT
42. NEXT
43. +
44. NEXT
45. -
46. NEXT
47. +
48. RUN
DESCRIPTION
OFF is displayed with off setpoint flashing. Default value of 072F is what we
want. If another value is desired, use the +/- keys to roll to that value.
NOTE: Because the resolution is 1.5 F, not all values of F will be possible.
Sensor event # 02 is shown. Repeat the above steps to select sensor 1, chan-
nel 1, 12:00 PM, MON thru FRI, an ON setpoint of 077F and an OFF setpoint of
075F.
Displays SPEC (special holiday) header.
Select SPAN (holiday duration) header.
First holiday duration is shown with holiday # flashing.
Holiday start is shown with month flashing.
Roll to OCT (October).
Holiday start date is flashing. 01 is the desired date.
Holiday end month is flashing.
Roll to APR (April).
Holiday end date is flashing.
Roll to 30.
HOLIDAY (holiday schedule) is flashing. No schedule is currently selected (not
used).
Select A (holiday schedule A).
Programming is complete. The control will do a status update and then go to
the RUN mode.
39