Paragon EL71 General Instructions Manual page 13

When pressed from any menu header during review, the control will move to the next
menu header.
When pressed from a review step, the control returns to that menu header.
RUN - This key will return the control to the RUN mode.
From all programming steps (excluding the override menu), the control will perform a
status update and return to the RUN mode.
From all review steps, the control will go straight to the RUN mode without updating.
If the REVIEW key was pressed while in a programming step, the control will perform
a status update and return to the run mode.
When in the override menu, this key will return the selected channel from an override
to the current event status shown and return the control to the RUN mode.
OVERRIDE - This key will take the user to the override header.
From the RUN mode, this key will jump to the override header.
From the override header, the selected channel's state is toggled and the control
returns to the RUN mode.
13