Keypad Description - Paragon EL71 General Instructions Manual

Keypad Description

Master Reset - Clears time and program. Display will show "MEM CLR." The reset switch is
accessed by inserting a pointed object, such as a paper clip, into the reset hole to
the right of the keypad.
PROGRAM - This key allows the user to add, delete or change parameters (events, time, holidays,
etc).
When pressed from the RUN mode, the programming menu is displayed starting with
the TIME menu header.
When pressed from a menu header, the control will advance to the next menu header.
When pressed from a programming step, the control returns to that menu header.
When pressed during review, the control will go to the appropriate programming display.
REVIEW - This key allows the user to review all the programmed steps using displays con-
densed to show as much information as possible on one display. The user will not be
able to change the program in the Review mode.
When pressed from the RUN mode or any programming step within a menu header,
the control will return to the TIME menu header.
12