Sensor Events - Paragon EL71 General Instructions Manual

Sensor Events

Sensor Events header. Up to 32 sensor events can be programmed. A sensor event can
be assigned to either channel. Each sensor event can be assigned to any day or combi-
nation of days including the 3 holiday schedules (A, B and C). Use the NEXT key to begin
programming.
The +/- keys will quickly step through the sensor events when the event # is flashing.
Select the sensor number, select the channel and program the hours and minutes while
each of these parameters are flashing. When a sensor number is shown, its sensor type
(F,C,L or U) is also shown. If the input is not configured as a sensor a question mark (?) is
shown.
Select YES for each day that is to be included in this sensor event.
Program the turn on setpoint.
Program the turn off setpoint.
28