Override; Run - Paragon EL7100 General Instructions Manual

Override

Keyboard Override header. This mode is reached by pressing the OVERRIDE key
from the RUN mode. Press the NEXT key to continue in this mode or press the
RUN key to exit this mode without affecting a change to the load status.
This screen shows the status of both channels (one channel for the EL7100) on
the bottom line of the display. If the channel no. is flashing, the channel is currently
overridden. If it is flashing mostly on, the channel is overridden on. If it is flashing
mostly off, the channel is overridden off. The channel # currently pointed to will be
flashing. The current event for this channel is shown below the channel # (e.g. ON,
OFF, NONE). Press the OVERRIDE key to toggle the channel status until the next
event. Press the RUN key to cancel an override. Press the +/- keys to select the
other channel. To exit the override mode without making a change, press the PRE-
VIOUS or NEXT key to return to the override header, then press the RUN key.

RUN

The RUN mode is the normal operating mode. In the RUN mode, the current time
and day are shown. If today is a holiday, the active holiday schedule is also
shown. Channel status is shown on the bottom line. The channel no. is shown if
that channel is on. If the channel no. is flashing, that channel is currently overrid-
den. If it is flashing mostly on, the channel is overridden on. If it is flashing mostly
off, the channel is overridden off.
21