Programming; Programming Overview - Paragon EL71 General Instructions Manual

Programming

Programming Overview:

After pressing the PROGRAM key, the EL71 and EL72 will continue to control the outputs based on
the events that were operating at the time the PROGRAM key was pressed. The control will not
check for new events until it has gone through a status update.
The control remains fully functional after pressing the REVIEW key, provided the REVIEW key was
not pressed while in the programming mode.
During operation, the control will be in the RUN mode. When programming (or reviewing), the order
of the program headers and steps is as follows:
TIME
CONF
ASTR
EVNT
INPT
EVNT SENS
HOL
16
- set time, date, daylight savings time
- 12/24, stagger up, durations 1-4, duty cycles 1-4
- sunrise, sunset, latitude, hemisphere
- on, off, durations 1-4, duty cycles 1-4
- configure inputs
- sensor events
- set holidays