Paragon EL71 General Instructions Manual page 42

STEP KEY
18. +
19. PROGRAM Press PROGRAM key to step through headers until EVNT (event header) is
20. NEXT
21. NEXT
22. +
23. NEXT
24. +
25. NEXT
26. NEXT
27. +
28. NEXT,+
29. NEXT,+,-
30. RUN
42
DESCRIPTION
Change NO to YES to assign astro to channel 1.
reached.
First event is shown with event # flashing.
Event type is flashing.
Select ON event type.
Hours are flashing.
Roll hours to 4 AM.
Minutes are flashing. 00 is desired value.
SUN is flashing. NO is displayed.
Change NO to YES to assign this ON event to Sunday.
Assign this ON event to MON - SAT.
Second event is shown with event # flashing. Program this second event as an
OFF at 11:00 PM for SUN - SAT.
Programming is complete. The control will perform a status update before going
into the RUN mode.