Advertisement
K E Y PA D D E S C R I P T I O N
EC7000, EC7004 and EC7005
RUN-
Returns timer to the RUN mode. The timer will
only control the load when in the RUN mode.
MODE-
Advances from one programming mode to the
next. the order of programming modes is as
follows: Clock Format Select, Run, Set Time,
Setpoint Programming, Set Duration 1 and Set
Duration 2. After the last mode, the control will
loop back to the Run Mode.
"
Rolls through the parameter currently being
programmed.
ENTER-
In all programming modes, what is shown in
the display is what exists in memory. Pressing
the ENTER key simply advances to the next
parameter to be programmed. (i.e. hours to
minutes).
Advertisement
