11.3
Configuring alarm relay contact types
11.4
Installing chemical drums
Set alarm relay
Alarm relay
contact type?
contact type:
Expert code:
NC
xxxx
Configuring how the alarm relay is to behave.
Setting
Normal mode
NC (normally closed)*
closed
NO (normally open)
open
* recommended
1.
The LCD screen must display
[Start/Stop] key.
2.
Place the new chemical drums beneath the system.
Observe the colour code
Acid = red, left; chlorite = blue, right!
3.
Screw the covers with the correct suction lances on to the chemical
drums.
4.
Next the mixer vessel and the storage tank must be filled and the
metering pumps bled. This part of commissioning is menu-con‐
trolled, see the following chapter.
Fault
open
closed
OFF
Operation:
24 h
ClO2:
4 g
'OFF' , if necessary press the
Start up
B0587
39