Water Supply Diluting Water; 3-Way Valve - ProMinent ProMaqua Bello Zon CDLb Series Operating Instructions Manual

Installation

9.1.6 Water supply diluting water

9.1.7 3-way valve

26
Fig. 11: Installing the hose
1 Pump suction valve
2 Nozzle
3 Clamp ring
4 Union nut
5 Hose
The diluting water is fed to the system via a tube connection.
Use particle-free potable water that is non-corrosion inducing!
Only valid for Bello Zon
Here a 3-way valve is already mounted and installed on the
plate!
WARNING!
Warning of toxic ClO
The venting connector (connector 3) has a blanking plug,
which must only be removed during venting or drainage.
Otherwise the inadvertent release of ClO
occur.
The supplied 3-way valve must be mounted on the wall as
close as possible to the Bello Zon
Connect connector (1) with the ClO
necessary using a multifunctional valve with bracket, order no. 1027652,
connect connector (2) to the point of injection. Use PTFE tube, 6 x 4 mm
(order no. 37426)!
® CDLb 120:
solution
2
solution could
2
system.
®
outlet of the Bello Zon ®
2
system (if