Configuring The Snmp Agent - 3Com 3CRGPC10075 User Manual

Configuring the
SNMP Agent
To disable sending of the device logs to a syslog server, click Disable.
Figure 48 Sending Device Logs to a Syslog Server
4 In Minimum Severity Level, specify the type of log information that will be
sent to the syslog server. Available options include:
1 - Alert – Send only very important alert information to the syslog
■
server
2 - Critical
■
3 - Error
■
4 - Warning
■
5 - Notice
■
6 - Informational
■
5 Click Save.
An SNMP manager application gains access to the Access Point's SNMP
agent if the management application has the Access Point's IP address.
To ensure security when SNMP is used, the SNMP agent can be
configured as read-only, read-write, or disabled. The Access Point sends
specific traps for some conditions. Supported SNMP trap versions include
1 and 2c.

Configuring the SNMP Agent

89